ABS lights and traction lights all come on

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • RLT
    CrawlerStar
    • Jul 2010
    • 442

    #17
    Originally posted by eksjay View Post
    They're ba-ack!!! Re: ABS and Traction Control lights.

    Will have to see what the scanner says this time.

    If found to be the rear driver side wheel again, I guess it can be swapped with a sensor from another wheel and if the fault follows the sensor then that will confirm a new sensor is needed.

    Are all speed sensors on the market the same or should I stick with Mopar?
    I just stick with the Mopar.
    Rear ones weren't expensive. Bought a couple a few years back when getting the rear hand brake units replaced as they were badly rusted, in-case the originals got damaged, but just reused the old ones as I new they worked.

    Comment

    • eksjay
      Full Flexer
      • Jan 2009
      • 1136

      #18
      Thanks RLT, I will stick with Mopar. Will buy 2 of them as it might be a chore to order again when another speed sensor packs it in.

      Comment

      • eksjay
        Full Flexer
        • Jan 2009
        • 1136

        #19
        Okay, finally a new sensor installed (drivers side rear wheel), computer was reset and traction control/abs warning lamps are no longer illuminated.

        Have driven it a few days, and the JKU Abs/traction control is functioning as it should.

        Comment

        • RLT
          CrawlerStar
          • Jul 2010
          • 442

          #20
          All good then
          Thanks for reporting back as many don't.

          Comment

          • Banshee
            SwampDigger
            • Jul 2010
            • 3768

            #21
            Good to see you got it sorted!
            Jeeps: Lego for grownups!

            Comment

            Working...
            X