What are your next mods / What did you do to your TJ today?

[450exc]

Got my rear sorted , coils mounted , just have top shock mounts to fit , Cant wait to drive this thing .

[bucko92]

..then bend backwards and contort impossibly!

I had a full on day! Visited Wooders twice for a fan blower resistor and front sway bar link. Bought a torque wrench to install my sway bar link and found out I only have metric sockets *facejeep* Any one have a, like, 7/16th 1/2" socket bit? :P
In other news, my fan now blows on High, medium AND low *happydance*
And I 'adjusted' my accelerator. I used to be able to hover my foot over the accelerator and slide my foot sideways UNDER the brake. No mechanic seems to have a problem with this though. I fixed it good and proper like with a cable tie! I also had a chance to practise my yoga

[Cornelius]

Hahahaahahahahaa well done !!!!!!!!!!!!!

[bucko92]

And now I'm off to bunnings to get some mole grips and torx heads.
On a side note, does the ball end of a sway bar link need to be screwed out or beaten out with a big stick?

[Tassie Jeeper]

I had a full on day! Visited Wooders twice for a fan blower resistor and front sway bar link. Bought a torque wrench to install my sway bar link and found out I only have metric sockets *facejeep* Any one have a, like, 7/16th 1/2" socket bit? :P

got a 13mm single hex socket? will do the job good enough i dont have any imperial tools at all hate them with a passion stick to "single hex tools" and ul be fine

[rhysTJ]

HUGE weekend ahead...

Full service...
SYE
Shocks
Full short arm lift
new flares
new spare
and finally new wheels

[lifted TJ]

Jeeps lookin naked now!!!

[Cornelius]

New headlights

Looking a bit different up front ...........