F/S amc v8 cam, lifters, timing chain

[ian]

ITEM: new proformance cam, double row timing chain, hydrolic lifters. all made in USA.
TO SUIT:amc v8
CONDITION: new still in boxes,
REASON FOR SELLING: not needed
PRICE AND PRICE CONDITIONS:$320
LOCATION:brisbane

[360]

cam

hi ian, what brand and size/specs do you have for the cam? and what brand is the t-chain set? cheers..dc..

[ian]

timing chain is S.A.gear. usa

cam is Clevite Performance usa
spec's
duration @ .50" 218
SAE duration 294
lobe spread 110
valve lift .488
cam lift .305

[360]

cam specs

hi ian, with the specs u sent the cam lift/valve lift and duration should have inlet/exhaust figures?it seems like about a stg 3 cam would that be right?and what is the rev range?
cheers..dc..

[ian]

inlet and exh have the same specs on this cam, and the rev range is 1800 to 5500rpm with good idle.

[Wooders]

Just curious - any reason you didn't use in your current build?
Might be interested as I;m keen to get back into my 360 project - but $$ is limited

[360]

hi ian what comp ratio does the cam need??..cheers..

[ian]

hi ian what comp ratio does the cam need??..cheers..

It is a mild to med cam as far as i know comp ratio would not be a problem.